NANOCOMS
NCOM48 DISCOVERY 1 EDC

The Nanocom Evolution for the Discovery 1 EDC (diesel) includes the following:

The main Nanocom Evolution unit,

BLUE OBD lead lead (used to connect the Nanocom Evolution unit to the vehicles OBD socket),

USB Update lead (used to connect the Nanocom Evolution unit to a laptop/PC for updating Firmware or inputting the unlock codes),

Unlock codes for the Discovery 1 EDC :

NCOM18:
Bosch Diesel Engine Management System


Functions include Reading and Clearing of Faults, a Settings page and Live data Inputs and checking output functions.

Wabco C type ABS

As well as reading and clearing of faults as standard, the actual settings are limited to 3 items but shows if ETC (Electronic Traction Control) is fitted to the ABS ECU. Inputs of Live data and Outputs for testing functions are available as is the function to bleed the hydraulic system. It should be noted that the live data function ceases to read once the vehicle reaches a certain road speed. This is a manufacturing setting that cannot be overridden.

SRS MPS (TYPE 1) Airbag 

(up to 1996 or in North American Specification models NAS up to 1999)

The ECU can generate and store up to 24 faults which can be read and cleared using the Nanocom when generated.

SRS SPS (TYPE 1) Airbag (1996 to 1999)

The ECU can generate and store up to 24 faults which can be read and cleared using the Nanocom when generated.

Lucas 10AS Alarm

The 10AS alarm will read and clear triggered events, allow you to view various settings and data as well as make and save changes to the data.You have a choice of Inputs again to see live data and can also test certain outputs to make sure the alarm is working as it should. Finally you can also program the PLIP (not the key) to the ECU.